How to Whitewash Wood | House One | This Old House



Whether you’re revamping an old piece of furniture or treating bare wood, a whitewash finish is the perfect way to lighten the look while still maintaining a hint of the wood grain

#ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse

Cost: $15
Time: 30 minutes
Skill level: Easy

Materials
Lint free-cloth [https://amzn.to/387D9wn]
White paint [https://amzn.to/3bSZZZK]
Water or premix [https://amzn.to/308jCr4]
Cup
Paint stick [https://amzn.to/2PrlmJX]

Tools
Paintbrush [https://amzn.to/3kLQu2r]
Putty knife [https://amzn.to/3bXINlP]

What is the Difference Between Whitewash and Paint?
Whitewash is a semi-opaque finish applied to an existing finish or bare wood with the goal of allowing the base coat or wood grain to show through. Paint is applied and dried as a solid coating that does not allow the wood grain to be seen through it.

Using Premixed Whitewash vs. Making it
To achieve this look, you can use a premixed option or make your own by mixing water and white paint. I’m going to be mixing one part water with one part white water-based paint.

Steps for Mixing Whitewash
1. Stir the mix, and then brush it onto the wood. Wait a minute for it to soak in, but not so long that the paint starts to dry or feel tacky.
2. Using a cloth, wipe away the excess. Wiping lightly with a slightly damp cloth will leave a more opaque finish while wiping several times with a dry cloth will create a more transparent finish.
3. For an even more opaque finish, allow the paint to dry and then apply a second coat.
4. Another option to increase or decrease the opacity is to change the ratio of water to paint.

Tips for Applying Whitewash to Wood
Once you know the basics, try these variations:
• Apply water to a board to raise or “pop” the grain. Apply the whitewash solution, and then scrape it off with a putty knife to highlight the grain.
• Next try applying a layer of gray paint mixed with water to a wood that would typically have a yellow undertone, like pine, to mute the color.
• Once dry, apply a whitewash finish to complete the look.
• Lastly, apply dark stain to a rough wood. Once dry, apply a whitewash and then scrape off the excess for a weathered rustic look.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH

Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/streaming-app

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr

How to Whitewash Wood | House One | This Old House
https://www.youtube.com/thisoldhouse/

source

What Do You Think?

Search, Connect & Communicate!
Join us now, it's free!

Comments

No comments yet